The ATPOL III power quality analyzer and electric motor analyzer comprehensively
SDT Ultrasound
Ultrasound is considered the first line of defense for finding defects that can lead to asset failure.
The first signs of change in the operating condition of an asset are usually indicated in the ultrasound frequencies.
Only after the asset has progressed to a more severe stage of deterioration do other asset condition monitoring technologies begin to play a role.
For planners and schedulers, having the largest window of opportunity possible to order parts, plan downtime, and allocate labour represents a tremendous advantage.
Ultrasound is one of the three classification of sound:
Besides Infrasound and Audible sound, Ultrasound refers to any sound pressure wave with a repetition frequency greater than 20 kHz. The characteristics of ultrasound, especially around 40 kHz are particularly interesting for inspectors listening for symptoms of assets failure.
Related product
- Related product
- Related product
- Related product
- Related product
- Related product
- Related product
- Related product
- Related product
VCAT-I Vibration Analysis Category I
decor element
This is the place to start your vibration analysis career. You will learn all of the essentials so that you can contribute to the vibration analysis program:
- An introduction to condition monitoring and reliability improvement
- The fundamentals of vibration
- How to collect quality data
- An introduction to vibration analysis and common fault conditions
After this course, vibration analysis will make much more sense. You will learn how to do a good job and why it is so important that you do a good job.
The training and accredited certification follow ISO 18436-2 and ISO/IEC 17024.
- Review of maintenance practices
- Review of condition monitoring technologies
- Principles of vibration
- Data acquisition
- Proximity probes
VCAT-II Vibration Analysis Category II
This course will prepare you to be a real vibration analyst. You will learn:
- Vibration Measurement basics: sensors, mounting, locations, and collecting quality data
- Signal processing basics: sampling, windowing, averaging, and how to set up the data collected correctly
- Equipment fault conditions: unbalance, misalignment, bearings, resonance, and many more
- Vibration analysis techniques: spectral analysis, phase analysis, time waveform analysis
And you will learn many more tips, tricks, and concepts to help you succeed as a vibration analyst.
The training and accredited certification follow ISO 18436-2 and ISO/IEC 17024.
- Review of maintenance practices
- Review of condition monitoring technologies
- Principles of vibration
- Data acquisition
- Proximity probes
VCAT-III Vibration Analysis Category III
This course is for the leader of the vibration analysis program and the person who wants to be the vibration specialist. On this course you will learn:
- Advanced signal processing
- How to diagnose the widest range of fault conditions
- How to utilize all of the vibration data types
- Resonance, dynamics, modal, and ODS
- How to manage a program and lead the team
Every Vibration program should have a Category III vibration analyst leading the program. This is your chance to be the leader.
The training and accredited certification follow ISO 18436-2 and ISO/IEC 17024.
- Review of maintenance practices
- Review of condition monitoring technologies
- Principles of vibration
- Data acquisition
- Proximity probes
VCAT-IV Vibration Analysis Category IV
We call the vibration Category IV the “Vibration superheroes”. You have reached the pinnacle of the field. This course is challenging, but when you are up to it, the Mobius Institute™ course is the best way to be prepared to pass the exam. You will learn so much, but it is summarized below:
- Advanced signal processing
- Modal analysis and operating deflection shape analysis
- Machine and structural dynamics
- All of the measurement types associated with critical fluid film bearings
- How flexible rotor and fluid film bearing machines work
- Rotordynamics and flexible rotor balancing
And that is just the beginning. Our animations and simulations make it much easier to understand.
The training and accredited certification follow ISO 18436-2 and ISO/IEC 17024.
- Review of maintenance practices
- Review of condition monitoring technologies
- Principles of vibration
- Data acquisition
- Proximity probes
Field Lubrication Training and Certification
After this course, you can move away from outdated methods of vague, non-specific lubrication procedures and job plans, and assist with implementing an effective lubrication program in any industrial workplace.
In brief, you will learn:
- The impact that best-in-class lubrication practices can have on machine health and reliability.
- How to manage lubricant delivery, storage, and dispensation.
- How to properly change and/or top up the oil in mechanical equipment found in common industrial sites.
- How to use simple techniques to select lubricants with the proper base oil and additive system for machines commonly found in industrial settings.
- How to use simple techniques to select grease application methods (including automated delivery) that are least intrusive and most effective for machines commonly found in industrial settings.
- How to use simple techniques to estimate re-grease volumes and intervals for machines commonly operated in industrial settings.
- How to properly maintain automatic lubrication systems (auto-grease, mist systems, etc.).
- How to employ basic oil analysis techniques to identify and troubleshoot abnormal lubricant degradation conditions and use simple techniques to adjust the lubricant specification accordingly.
Our course is filled with 3D animations and interactive simulations that make the subject very easy to understand.
The training and accredited certification follow ISO 18436-4 and ISO/IEC 17024.
- Review of maintenance practices
- Review of condition monitoring technologies
- Principles of vibration
- Data acquisition
- Proximity probes
Infrared Thermography Training and Certification
You will learn the fundamentals of infrared energy and the camera, along with the most common applications. In brief, you will learn:
- Why we perform condition monitoring
- All about heat vs. temperature and temperature scales
- The laws of thermodynamics
- How thermal conductivity occurs in different materials
- The difference between thermal conductivity and specific heat capacity
- Real-life examples of conductive heat transfer
- How to acquire data and process images
- The concept of “comparative temperature measurements”
- How to distinquish between active and passive thermography
Our course is filled with case studies, animations, and simulations that make the subject very easy to understand.
The training and accredited certification follow ISO 18436-7 and ISO/IEC 17024.
- Review of maintenance practices
- Review of condition monitoring technologies
- Principles of vibration
- Data acquisition
- Proximity probes
Ultrasound Analysis Training and Certification
decor element
The ultrasound technology is so versatile, and our course will teach you how to fully utilize the capabilities of the technology. In brief, you will learn:
- Condition monitoring and reliability improvement
- The theory of sound and ultrasound
- How to take quality measurements
- How to detect a wide range of fault conditions: bearings, valves, steam traps, electrical systems, and much more
- How to detect leaks
- How to precision lubricate bearings
Our course is filled with case studies, animations, and simulations that make the subject very easy to understand.
The training and accredited certification follow ISO 18436-8 and ISO/IEC 17024.
- Review of maintenance practices
- Review of condition monitoring technologies
- Principles of vibration
- Data acquisition
- Proximity probes
Applications
Sparrow Advanced wireless diagnostics for balance-of-plant assets
Because every asset counts, we are now introducing Sparrow, the smallest wireless triaxial vibration and
FALCON Vibration analyzer
FALCON is an innovative tool for vibration measurement and analysis that puts condition-based maintenance within the grasp of all users.
AT-400 Achieve precision with the Acoem AT-400 high-end dual-axis shaft alignment system.
Its Dual Sweep method captures accurate measurements …
AT7™ Pro Deenergized Motor Circuit Analysis™ (MCA) Diagnostic Instrument
The AT7™ Pro allows technicians to efficiently and accurately evaluate motors in the field, capture diagnostic motor data for condition monitoring,
SDT340 Advanced Ultrasound and Vibration Data Collector
SDT340 is an all in one condition monitoring solution designed to inspect and gather data from every potentially faulty industrial asset present in your plant.
LUBExpert
Poor greasing practices are a leading cause of bearing failure. Less than 40% of bearings will last long enough to deliver their engineered value and..